We try to have all spareparts and useful accessory on stock. We deliver in the hole world.


useful, for events, transport, etc.

 


"Die Herausforderer" (The Contenders) The book to the Cup
by Marc Bielefeld & Peter Sandmeyer
Germany reaches out for the America?s Cup. An account by reporters from German magazine ?Der Stern?.
Bestellen
18,49 €* excl VAT
22,00 €* VAT included
Art.-No.:
14659
delivery: no longer available


2 tell tales/wind indicators
The tell tales are telling the air flow in the sails.
Bestellen
2,35 €* excl VAT
2,80 €* VAT included
Art.-No.:
wiba
delivery: available ex stock


3x1 flexible bow sprit - ideal for racing
weight: ca 6,2 g
material: Carbon und Polyolefin

Now a regulation with our 3x1-races: The flexible race bowsprit. Saves the hull during collisions.
Bestellen
7,98 €* excl VAT
9,50 €* VAT included
Art.-No.:
3x1buflex
delivery: available ex stock


3x1 stick for rack
Mit diesen Aufkleber können Sie Ihren Bootsnamen und Segelnummer auf den Kunststoffständer anbringen.
Bestellen
15,97 €* excl VAT
19,00 €* VAT included
Art.-No.:
130281
delivery: 1-3 weekdays, will be produced for you


3x1 rack easy plug - suits the transport bag
The ultra-transportable 3x1 rack. This rack can be mounted in 3 seconds. The elastic cords prevents falling in pieces. Made of light but nearly unbreakable plastics.

The rack is suitable for the boat bag/transport bag!
Bestellen
40,34 €* excl VAT
48,00 €* VAT included
Art.-No.:
3x1rack
delivery: available ex stock


3x1 bin-cover black - Addition to the sailbag
The 3x1 bincover is the ideal Addition to the Sailbag for the 4 Sailset and the mast.

It's protects the boat from scratches.
It´s made of robust sailsack material.
The VO60 is suitable for the casing.
Bestellen
41,18 €* excl VAT
49,00 €* VAT included
Art.-No.:
3x1covsw
delivery: available ex stock


Original kyosho stand for AC Modell
Alloy / plastic
Bestellen
26,81 €* excl VAT
31,90 €* VAT included
Art.-No.:
acRackAlu
delivery: no longer available


Set of clear hatches with outside switch for AC60
This hatches are lightweigth and clear. You can always see, if you have water in the boat and you must not release them to switch your boat off. A wtertight switch is mounted on the outside of the hatches.
You need out article nr. zuma to moiunt the hatches.
Bestellen
24,37 €* excl VAT
29,00 €* VAT included
Art.-No.:
ac60luk
delivery: no longer available


AC60 carring bag black
Handy bag for transportation of a construted AC-modell (with mast, keel and rudder).
Just place the boat into the bag, close the zipper and you are done. The bag contains a side pocket for the boat rack and the remote control
Bestellen
73,95 €* excl VAT
88,00 €* VAT included
Art.-No.:
AcTaGr
delivery: on request


AC-model carrier bag, Design "Shosholoza"
Handy bag for the transport of a built-on AC model (incl. mounted mast, keel, rudder).
Simply place the boat inside the bag, fasten the Velcro and off you go!
Incl. a suitable side pocket for the remote control and the rack.
Bestellen
91,60 €* excl VAT
109,00 €* VAT included
Art.-No.:
AcTascho
delivery: 7-14 weekdays, will be produced for you


ACC 110 / VO 60 Tuningkeel Rack folding with belds
Rack off wood wit binconverse belds

  • high quality screws
  • its perfect for the VO60 with Tuningkeel or for the AC 1100
  • perfectly folding through the belds
  • Bestellen
    38,66 €* excl VAT
    46,00 €* VAT included
    Art.-No.:
    accrack
    delivery: available ex stock


    Antenna - 40cm for Multiplex Cockit SX receivers
    If you want to place the receiver deep in the hull, or if you are using a carbon hatch, you will have a reduced range somtimes. With this long antennas you can solve these problems easily. It´s no problem to change by opening the receiver-case.
    You don´t have to solder.
    Bestellen
    5,80 €* excl VAT
    6,90 €* VAT included
    Art.-No.:
    ant40cm
    delivery: available ex stock


    "39270" - The official guide to the Volvo Ocean Race 2011-2012
    39270 is the official book of the Volvo Ocean Race 2011/2012. A portrait of all teams from start in Alicante to finish in Galway.
    Bestellen
    41,97 €* excl VAT
    49,95 €* VAT included
    Art.-No.:
    bu39270
    delivery: in stock


    Biscuit-Trekkingcookies
    Our Commentar: "Makes sure enough, if not more else is pure. "
    It´s taste like other famous branded products.

    Content: 100g ( 12 Bisquitcookies )
    Calories: 452 kcal/100g
    Protein: 8,3g/100g
    Fat: 14,2g/100g
    Carbohydrate: 73,1g/100g
    Bestellen
    1,01 €* excl VAT
    1,20 €* VAT included
    Art.-No.:
    fookeks
    delivery: no longer available


    Bleilot 1kg, Bojengewicht mit Vinylhülle gelb
    Dieses Bleilot dient zur Beschwerung der Boje. Es hat ein Gewicht von 1kg und ist mit einer robusten gelben Vinylhülle umschlossen. Zur Besfestigung des Seils am Bojengewicht ist eine Öse aus rotfreiem Stahl vorhanden.

    Gesamtlänge incl. Öse: ca. 132mm
    Durchmesser: ca. 35mm
    Bestellen
    25,13 €* excl VAT
    29,90 €* VAT included
    Art.-No.:
    blei1000g
    delivery: on request


    Plasticblock 40mm long with 14mm roll
    Plasticblock f.e. for buoysystems or other big modells.
    Matching caliber for our Flaglines.
    Bestellen
    2,94 €* excl VAT
    3,50 €* VAT included
    Art.-No.:
    plablock
    delivery: available ex stock


    Hold-all, for easy transport of your 3x1, VO65, V70i, R46 and VO60/Seawind
    Everything is neatly kept inside a single bag! This sturdy hold-all will be your reliable companion when taking your boat for a day out. The inside will hold a number of items, all firmly stowed away in their respective compartments. Damage due to transportation is now a thing of the past.
    In all long sides are reinforcements of 6 strong plasics in the double-walled textile
    sides. So the boat is protected optimally.
    Bestellen
    100,00 €* excl VAT
    119,00 €* VAT included
    Art.-No.:
    3x1tasw
    delivery: available ex stock


    Hold-all, backpack, for easy transport of your 3x1, VO65, V70i, R46 and VO60/Seawind
    Everything is neatly kept inside a single bag! This sturdy hold-all will be your reliable companion when taking your boat for a day out - on the bicycle too. The inside will hold a number of items, all firmly stowed away in their respective compartments. Damage due to transportation is now a thing of the past.
    The broad straps are adjustble. Dur to the high box we have added an abdominal belt for more stability.
    In all long sides are reinforcements of 6 strong plasics in the double-walled textile
    sides. So the boat is protected optimally.
    Bestellen
    125,21 €* excl VAT
    149,00 €* VAT included
    Art.-No.:
    3x1taru
    delivery: available ex stock


    Board Bag - the practical bag for your RC-model onboard
    In this little bag you can pack your AC60 onboard of your yacht. Safe and space saving.

    Integrated sail- and mast case.
    - high quality zipper
    - safe fixation of all parts
    - measurement: 920mm x 300mm x 90mm
    Bestellen
    82,35 €* excl VAT
    98,00 €* VAT included
    Art.-No.:
    acbordbag
    delivery: on request


    BV110 E-PROFILE-Sealing for the Lid
    1m long, 9mm wide
    Bestellen
    3,28 €* excl VAT
    3,90 €* VAT included
    Art.-No.:
    bvdichtung
    delivery: no longer available


    Compistions for VO60/ACC1100/Seawind SW-19B
    Complete set composition for either scuttles from the VO60, ACC110 and the Kyosho Seawind.
    Bestellen
    10,00 €* excl VAT
    11,90 €* VAT included
    Art.-No.:
    sw19bky
    delivery: no longer available


    Classic Yachts - The most beautiful Regatta and Cruising Yachts
    Book
    Bestellen
    25,13 €* excl VAT
    29,90 €* VAT included
    Art.-No.:
    bu_km50
    delivery: available ex stock


    Die Klassischen Yachten Rennschiffe im Wandel der Zeit (Classic yachts racing yachts throughout the course of time)
    Time to race! Volume 3 of this series deals with the fascinating class of racing yachts featuring sleek design, technical refinement and breathtaking dynamics.
    Bestellen
    33,53 €* excl VAT
    39,90 €* VAT included
    Art.-No.:
    bu_km49
    delivery: available ex stock


    DPSI Nano magnetic switch
    Compact and lightweight magnetic switch suitable for 7 amps permanent current. The switch can be turned on/off from the outside of the RC model using a magnet, so it is not necessary to drill any holes into the fuselage.

    Due to its high current rating, its low weight and its compact dimensions, the DPSI Nano is perfect suitable for R/C-Modelboats.
    Bestellen
    25,13 €* excl VAT
    29,90 €* VAT included
    Art.-No.:
    rcdpsischalt
    delivery: available ex stock


    Dragon Force Gummistöpsel
    Achtung: Nur 1 Stück
    Bestellen
    2,52 €* excl VAT
    3,00 €* VAT included
    Art.-No.:
    dfgumstoe
    delivery: available ex stock


    Precious AC wall holder, perspex
    Precious AC wall holder, perspex.
    The ideal wall holder for a decoratively presentation of your AC60 model yacht.
    Bestellen
    49,58 €* excl VAT
    59,00 €* VAT included
    Art.-No.:
    AcRackWr
    delivery: available ex stock


    Precious boat rack made of perspex, H-form
    The ideal rack for regatta boats with special painting. Made of perspex polished to a high finish. The hull does not bear upon the perspex-ground, but is held in place by thin chords.
    Easily removable through 4 screws. Ships disassembled.

    Bestellen
    74,79 €* excl VAT
    89,00 €* VAT included
    Art.-No.:
    ?AcRackH
    delivery: available ex stock


    precious oval perspex stand for AC model
    High-class, decorative perspex stand for AC models. It gives an harminic look in combination with your AC model.
    Form: oval.
    Bestellen
    54,62 €* excl VAT
    65,00 €* VAT included
    Art.-No.:
    ?AcRackO
    delivery: available ex stock


    Precious rack (perspex), for VO-racers
    Premium and decorative rack made of perspex, polished to a high finish. The ideal rack for your table. Distance from the floor to the edge of the deck: ca. 60cm. The boat takes up a slightly inclined position allowing for the sails to show up extraordinarily well.
    Bestellen
    257,14 €* excl VAT
    306,00 €* VAT included
    Art.-No.:
    ?VoRackB
    delivery: 14-21 weekdays, will be produced for you


    Precious rack (perspex), for VO-racers
    Premium and decorative rack made of perspex, polished to a high finish. The ideal rack for your table. Distance from the floor to the edge of the deck: ca. 40cm. The boat takes up a slightly inclined position allowing for the sails to show up extraordinarily well.
    Bestellen
    228,57 €* excl VAT
    272,00 €* VAT included
    Art.-No.:
    VoRackT
    delivery: 3-7 weekdays, will be produced for you


    modelboat-Service-box (with equipment and tools)
    This convenient kit fits everything you need on the spot for an unexpected situation.
    The size of the box may differ from the pircture, but this service-box fits in the hold-all bag of the 3x1.
    Bestellen
    47,48 €* excl VAT
    56,50 €* VAT included
    Art.-No.:
    repkit
    delivery: available ex stock


    Rescue hook for the rescue of modelboats
    With this brilliantly simple rescue hook you assist your modelboat in distress and drag it safely back to the harbour. As soon as you go backwards, your boat is safely released.
    Made for models ?Sunstorm? and ?Twinstorm?
    Bestellen
    9,24 €* excl VAT
    11,00 €* VAT included
    Art.-No.:
    mofa
    delivery: available ex stock


    Flaggenaufkleber mit Bedeutung auf Regatten 50x20cm
    Flaggenalphabet mit Bedeutung auf Wettfahrten
    - Texte bzgl. der Wettfahrtregeln mit ganz großer Schrift
    - Flaggen sind klein abgebildet, die kann man sowieso erkennen
    - Wettfahrtregeltexte mit den aktuellen englischen Regeln abgeglichen
    - Wettfahrt Flaggenkombis ergänzt
    - Format so, dass der Aufkleber gut auf die Duchten passt
    - abgerundete Ecken damit der Aufkleber sich nicht so schnell ablöst
    - Schallsignale gemäß Wettfahrtregeln
    - Größe: 50 cm x 20 cm

    Die Aufkleber gibt es sogar individuell - allerdings gegen Aufpreis nach Aufwand: mit Format, Größe und sogar die Hintergrund- und Schriftfarbe nach Wunsch - passend zum Yachtdesign. Natürlich Wasserfest.
    Bestellen
    4,03 €* excl VAT
    4,80 €* VAT included
    Art.-No.:
    flag1
    delivery: available ex stock


    Flight Recorder for Cockpit SX
    Extrem small, light date logger, that records all MULTIPLEX Sensor Bus (MSB) files on a Micro-SD card.

    The files will be saved as .csv date format and will be transformed over the Micro-SD card to the deskop (Micro-SD USB-Card reader included in scope of delivery). In Microsoft Excel or LogView it is possible to view or evaluate the files. The FlightRecorder will be connected at the sensor plug ("S") of a telemetry able M-LINK receiver or at any sensor.

    Recording time is min. 100h
    WIth 2GB Micro-SD card with max. data volume and max. amount of sensors.
    The exchange to a larger Micro-SD card is possible at any time.

    Start/Stop of the recording can be handle over the remote control. Alternatively the Auto-Start/Stop during switch on adn of.

    Flight path representation with GPS Data via GooglEarth
    Data export via LogView in "km"-data format for GoogleEarth is possible with the MULTIPLEX GPS
    Bestellen
    92,44 €* excl VAT
    110,00 €* VAT included
    Art.-No.:
    gpsrec
    delivery: 2 weekdays


    Flightcase
    Very robust flight case, optimised for air freight: plastic honeycomb plates, with protective steel caps at the corners and clenched with aluminium sections. Tne BV110 fits perfekt into the case.
    Bestellen
    747,90 €* excl VAT
    890,00 €* VAT included
    Art.-No.:
    bvcase
    delivery: on request


    Premium acrylic glass stand for the BV110
    - 600x250x10mm
    - Baseplate with facet-sanding
    - Boatstand laser-welded, incl. drilled hole, thread and VA screws
    Bestellen
    189,08 €* excl VAT
    225,00 €* VAT included
    Art.-No.:
    bvacrylsta
    delivery: 14-21 weekdays, will be produced for you


    High quality boat rack made of acrylic glass for 3x1
    Very high quality and decorative rack made out of acrylic glass.
    Between the rack and the hull is foam rubber.
    It's very easy to slot the part into each other. The rack fits into the hold-all bag.
    Bestellen
    108,40 €* excl VAT
    129,00 €* VAT included
    Art.-No.:
    3x1rack1
    delivery: 5-10 weekdays, will be produced for you


    High quality boat rack made of acrylic glass for 3x1
    Very high quality and decorative rack made out of acrylic glass.
    Between the rack and the hull is foam rubber.
    It's very easy to slot the part into each other. The rack fits into the hold-all bag.
    Bestellen
    125,21 €* excl VAT
    149,00 €* VAT included
    Art.-No.:
    VO65rack
    delivery: 3-7 weekdays, will be produced for you


    High quality presentation rack for your Open60
    Sturdy presentation cradle made from acrylic glass of 6mm in strength

    Self assembly. Phillips screwdriver required.
    Bestellen
    82,35 €* excl VAT
    98,00 €* VAT included
    Art.-No.:
    o60rack
    delivery: 3-7 weekdays, will be produced for you


    high quality teak-rack for C-Class/J-Class
    High quality rack made of massive teak. The rack is dividable and fits in the transortation box of the C-Class. To remove the side pole you just have to loose the butterfly nuts.
    Bestellen
    134,45 €* excl VAT
    160,00 €* VAT included
    Art.-No.:
    ccst
    delivery: on request


    Dinghy Sailing - valuable tips for trimming, tactis and handling.
    Book available in German only.
    Bestellen
    16,64 €* excl VAT
    19,80 €* VAT included
    Art.-No.:
    regbuch
    delivery: available ex stock


    Kamerahalter aus Carbon-Sandwich, nur 12g, für 3x1 und SailCam 720
    Dieser stabile Kamerhalter kann auf dem Heck der 3x1 mit Klettband befestigt werden. Die Kamera ist so 10cm über dem Boot und dadurch bei den meisten Bedingungen vor Spritzwasser geschützt. Passt perfekt zur SailCam 720.
    - Material: Carbon-Sandwich
    - Mit Klettband unten und oben

    (Lieferumfang ohne Kamera)
    Bestellen
    24,20 €* excl VAT
    28,80 €* VAT included
    Art.-No.:
    camha3x1
    delivery: no longer available


    Klassische Yachten Festivals in Nordeuropa (Classic yachts festivals in Northern Europe)
    by Detlef Jens
    For the past few years on the larger Northern European gatherings, the participants have celebrated the renaissance of the adorable ?old ladies? and classics. In his atmospherically dense pictures, Detlef Jens really manages to highlight the elegant design, the display of subtle and traditional handcraft and the dramatic races.

    The majority of pictures originate from our archive.

    132 pages, 26,5 x 31 cm, 99 illustrations, hardback, incl. book jacket
    ISBN 978-3-7822-0943-4
    Bestellen
    33,53 €* excl VAT
    39,90 €* VAT included
    Art.-No.:
    bu_km2
    delivery: available ex stock


    Talamex Wet Protect 100
    The high end formula for your safety at sea.
    Bestellen
    16,76 €* excl VAT
    19,95 €* VAT included
    Art.-No.:
    rcwet2
    delivery: no longer available


    short keel for shallow waters
    With this keel you can sail in shallow waters. The weight is the same as the deep keel, but the fin is wider and shorter. So you have to reef earlier.
    - depth 20,5cm (mounted at the 3x1/VOLVO OCEAN 65 appr. 24cm)
    - carbon/epoxy
    - weight 1,6kg
    - orange coated
    Bestellen
    184,03 €* excl VAT
    219,00 €* VAT included
    Art.-No.:
    3x1kielk
    delivery: 5-10 weekdays, will be produced for you


    Empty Flightcase
    Very robust flight case, optimised for air freight: plastic honeycomb plates, with protective steel caps at the corners and clenched with aluminium sections.
    Bestellen
    537,82 €* excl VAT
    640,00 €* VAT included
    Art.-No.:
    case115
    delivery: on request


    Bilge pump
    Ideal to remove water from your model boats!
    Bestellen
    3,32 €* excl VAT
    3,95 €* VAT included
    Art.-No.:
    ?ZuLenz
    delivery: available ex stock


    Lenzpumpe/Bilgepumpe mit Sensor und Warnlampe
    Diese Pumpe besitzt einen Sensor der sofort Ihr Modell leer pumpt, wenn er mit Wasser oder Feuchtigkeit in Kontakt kommt. In diesem Moment schaltet sich auch eine helle Warnlampe ein, die außen am Modell angebracht werden kann.

    Die Pumpe kann bis zu 40 mm unter Wasser stehen, der Anschluss erfolgt an eine 9 V Blockbatterie oder am Modellakku.

    Technische Daten:
    Höhe: 60 mm
    Grundfläche: 35x45 mm
    Fördermenge: 250 ml/min (bei 9 V)
    Betriebsspannung: 9 - 12 Volt
    Bestellen
    36,89 €* excl VAT
    43,90 €* VAT included
    Art.-No.:
    pump1
    delivery: no longer available


    luxury boat rack with 3x1-logo
    Very high quality and decorative rack made out of acrylic glass. The 3x1 Logo is engraved into the rack
    Between the rack and the hull is foam rubber.
    It's very easy to slot the part into each other. The rack fits into the hold-all bag.
    Bestellen
    167,23 €* excl VAT
    199,00 €* VAT included
    Art.-No.:
    3x1rack2
    delivery: 5-10 weekdays, will be produced for you


    MINOX Nachtsichtgerät NV 351
    Testet by the StockmariTeam on the ASSO 99: Now always on board.
    Bestellen
    209,24 €* excl VAT
    249,00 €* VAT included
    Art.-No.:
    m62410
    delivery: available ex stock


    Hatch sealing for model boats, grey
    The ideal solution to seal your model boat's notch for maintenance.
    The length of 20cm is sufficient for 1 AC model or Open60.
    Bestellen
    3,28 €* excl VAT
    3,90 €* VAT included
    Art.-No.:
    zuma
    delivery: available ex stock


    model boat-service-bag (without accessories and tools)
    This handy bag fits everything what a modell sailer needs for an unpredictable situation on the spot.The bag is made of high quality polyester-fabric with a solid zipper.
    By the way: This new model boat-service-bag fits perfect into the boats bag of the 3x1.
    - dimensions: 22cm x13cm x 18 cm
    - 1 big pocket for tool, racing rules book etc.
    - 1 big pocket with see-through box 19 cm x 13 cm x 4 cm
    - the see-through box has 10 different sized divisions for accessories like hooks, screws and so on.
    - 5 clear plastic folders with zip fastener for accessories like hooks, screws and so on.
    - 5 net-pockets with zipper for scissors, tongs or other accessories
    - strong all around coverage
    - material: 600 x 450 D Polyester
    Bestellen
    32,80 €* excl VAT
    39,03 €* VAT included
    Art.-No.:
    taser
    delivery: no longer available


    MULTIlight - elektronic switch with 5 LEDs
    MULTIlight See and be seen!
    Enhance your model with our lighting set! Angular dispersion, colours and flashing The set includes one set of pre-wired LEDs. One additional socket is provided for a further white LED, e.g. for another search light. The LEDs are attached to 1 m long leads, making them easy to install in many models. The functions can be switched on and off from the transmitter.
    1. Everything OFF
    2. Navigation lights ON
    3. Navigation lights, search lights and anti-collision beacon ON
    If the system is connected directly to the power source, all functions are permanently ON.

    Set contents:
    Control module
    Set of LEDs,
    1 x Red LED with 1 m connecting lead and socket
    1 x White LED with 1 m connecting lead and socket
    1 x Green LED with 1 m connecting lead and socket


    Data:
    - Power supply, via receiving system or direct 5 - 8.4 V
    - Current drain 3.5 / 23 / 31 mA
    - Case dimensions (L x W x H) 45 x 20 x 10 mm
    - Weight excl. LEDs 9 g
    Bestellen
    25,13 €* excl VAT
    29,90 €* VAT included
    Art.-No.:
    ledsx
    delivery: no longer available


    Open 60 Rack folding with belds
    Rack off wood with binconverse belds
    - high quality steel
    - its perfect for the Open 60
    - perfectly folding through the belds
    Bestellen
    38,66 €* excl VAT
    46,00 €* VAT included
    Art.-No.:
    op60rack
    delivery: available ex stock


    Option: Flagge mit Flaggenstock und Halter, 110mm, Messing
    - Länge Flaggenstock: 110mm
    - Flagge aus Spituch (Land wählbar)
    - Flaggenstock-Halter aus Messing
    - inkl. Montage
    Bestellen
    28,57 €* excl VAT
    34,00 €* VAT included
    Art.-No.:
    flastomo
    delivery: 3-4 weekdays


    Navigation light for 3x1 incl. Installation- and remotemodule, waterproof
    New and now available!

    The possibility to sail at night. The Navigationlight can be controlled by the remote control. The Bow - Lights are integrated elegant in the deck of the 3x1. Even the Stern - Light is integrated in stern surface of the boat.
    We recommend the direct order of the lights with the order of the boat, in the case to paint the light in one stage with the boat.

    The following function can be guieded by the remote control:
    - All OFF
    - Navigation Lights ON
    - Navigation Lights, Headlight (optional), Decks - Lamp (optionals)

    Bestellen
    108,40 €* excl VAT
    129,00 €* VAT included
    Art.-No.:
    led3x1
    delivery: on request


    Position lights for C-Class/J-Class inkl. mounting and rc steering switch
    - rc switch (on/off)
    - 3 leds
    - 3 laterns (white, red, green)
    - incl. watertight mounting
    Bestellen
    108,82 €* excl VAT
    129,50 €* VAT included
    Art.-No.:
    ledcc
    delivery: on request


    R46 carrier bag
    Practical, needled bag for transport of a built-on R46 model (with mast, keel and rudder).
    With fitting extra bag for transmitter and rack.
    Colour: black.
    Bestellen
    125,21 €* excl VAT
    149,00 €* VAT included
    Art.-No.:
    r46tasche
    delivery: 3-7 weekdays, will be produced for you


    R46/AC60 Stand
    Stand from wood. The straps are preserving the hull from damage.
    - Stainless Steel Screws
    - perfect for R46 and AC60
    - easy to furl
    - small pack size (only 2cm flat)
    Bestellen
    32,77 €* excl VAT
    39,00 €* VAT included
    Art.-No.:
    r46rack
    delivery: available ex stock


    Rectanglebox small polystyrene , crystal clear
    Box with 4x AA Batterybox, acceptor or small servo´s. The cover jamming easy with a band tape.
    It´s suitable for the Open 60, VO60, ACC 110,
    AC60 (with reconstruction)

    Inside dimension : 70 x 60 x 30mm (L x B x H)
    Outside dimension : 73 x 63 x 34mm (L x B x H)
    Bestellen
    1,01 €* excl VAT
    1,20 €* VAT included
    Art.-No.:
    DoReKl
    delivery: available ex stock


    Rectangle Polystyrene, crystal clear
    Box with 4x AA Batterybox, acceptor or small servo´s. The cover jamming easy with a band tape.
    It´s suitable for the Open 60, VO60, ACC 110,
    AC60 (with reconstruction)

    Inside dimension : 116 x 56 x 27mm (L x B x H)
    Outside dimension : 120 x 60 x 30mm (L x B x H)
    Bestellen
    1,60 €* excl VAT
    1,90 €* VAT included
    Art.-No.:
    DoReGr
    delivery: available ex stock


    Revolutionäres, digitales, wasserdichtes Peil-Fernglas BN 7x50 DC von MINOX
    Mit dem innovativen wasserdichten Peilfernglas BN 7x50 DC hat MINOX ein richtungsweisendes Wassersport-Fernglas geschaffen:
    Der integrierter digitale Peil-Kompass im Zentrum des Sehfelds richtet sich dank des Gravitations-Senors perfekt aus. Der hochsensitive integrierte Gravity-Sensor ermöglicht eine äußerst präzise Tilt-Kompensation bei Schräglage des BN 7x50 DC für eine Präzision des Kompasses auf 1° Grad Genauigkeit.
    Per Knopfdruck erhält man viele wichtige Informationen auf einen Blick - im Bruchteil einer Sekunde - und kann diese sogar speichern, um am Navigationstisch die Werte abzurufen:
    - Peilung (wahlweise mit Fadenkreuz oder Horizont) mit Speicherung
    - Höhenbestimmung von Objekten
    - digitales Barometer mit Aufzeichnung der letzten 16 Stunden
    - digitale Stoppuhr

    Vom StockmariTeam auf der ASSO 99 getestet: Gehört zur Bord-Ausrüstung.

    Bestellen
    419,33 €* excl VAT
    499,00 €* VAT included
    Art.-No.:
    m62415
    delivery: available ex stock


    Sail and Rig Trim (englisch)
    Das Elvström-Trimmbuch zeigt auf 82 Seiten in sehr anschaulichen Bildern wie man Mast und Segel einstellt.
    Die 157 (!) Illustrationen in diesem Buch sind so gut, dass sich die Texte nahezu erübrigen. Dazu gibt es Checklisten und eine riesige Menge Tipps aus der Praxis.

    Theman:
    - Aerodynamik
    - Segelprofile/Twist
    - Balance
    - Einstellen des Riggs (Topprigg, geteilte Riggs)
    - Spinnaker-/Gennakersegeln
    und vieles mehr.

    Sehr zu empfehlen.
    Bestellen
    24,37 €* excl VAT
    29,00 €* VAT included
    Art.-No.:
    130938
    delivery: available ex stock


    Coverage for schwitch and buckler for Seawind / VO-Racer FW-11B
    Bestellen
    8,27 €* excl VAT
    9,84 €* VAT included
    Art.-No.:
    swstoepsel
    delivery: no longer available


    Carrying tube for sails set of 3x1, V60,V70 and ACC110 model
    Adjustable carrying tube for letting you safely store and transport your model's sails and mast. This tube is made from polypropylene (PP) and can be adjusted to different lenghts between 63 and 100cm. The attached shoulder strap is adjustable too.

    ATTENTION: Don´t use this roll as permanent sail storage. The sails will become drilled a little bit after some days.
    Bestellen
    20,08 €* excl VAT
    23,90 €* VAT included
    Art.-No.:
    sero
    delivery: available ex stock


    AC60 Sticker set

    !!! 50% ab 100 !!!
    Bei allen Produkten der 50% ab 100 Aktion gilt:
    - Ab einem Bestellwert von 100 EUR oder mehr mit "50% ab 100" gekennzeichneten Produkte kosten diese mit "50% ab 100" gekennzeichneten Produkte nur 50%.
    - Die 50% werden nicht im Warenkorb, sondern bei Rechnungslegung berücksichtigt.
    - Nur solange der Vorrat reicht.
    - Keine Nachbestellung möglich, wenn nicht mehr auf Lager.
    - Lieferfähigkeit ohne Gewähr.
    Bestellen
    7,56 €* excl VAT
    9,00 €* VAT included
    Art.-No.:
    acAufOrg
    delivery: available ex stock


    Deco-Stickers for Seawind

    !!! 50% ab 100 !!!
    Bei allen Produkten der 50% ab 100 Aktion gilt:
    - Ab einem Bestellwert von 100 EUR oder mehr mit "50% ab 100" gekennzeichneten Produkte kosten diese mit "50% ab 100" gekennzeichneten Produkte nur 50%.
    - Die 50% werden nicht im Warenkorb, sondern bei Rechnungslegung berücksichtigt.
    - Nur solange der Vorrat reicht.
    - Keine Nachbestellung möglich, wenn nicht mehr auf Lager.
    - Lieferfähigkeit ohne Gewähr.
    Bestellen
    10,08 €* excl VAT
    12,00 €* VAT included
    Art.-No.:
    sw13ky
    delivery: available ex stock


    All weather pouch for radio control transmitter
    This weather pouch is indispensable to protect your hands and the transmitter from rain, wind and the cold. The pouch's polythene foil allows full control of your transmitter's functions. Lining made of Mylar-Keylar sail cloth.
    Bestellen
    66,39 €* excl VAT
    79,00 €* VAT included
    Art.-No.:
    ZuTaRc
    delivery: on request


    Spezialklebeband auf Kautschuckbasis
    Das perfekte Klebeband zum Abkleben von Luken und zur Segelreparatur
    Bestellen
    5,80 €* excl VAT
    6,90 €* VAT included
    Art.-No.:
    131244
    delivery: available ex stock


    Race buoy set "stockmaritime"
    Pair of high-visibility buoys for your model boat races, with flagpole, flag and snaplight mounts.
    Bestellen
    108,40 €* excl VAT
    129,00 €* VAT included
    Art.-No.:
    bojenset2010
    delivery: no longer available


    kitbag stockmaritime
    kitbag (nylon) with extra wet-box
    high wear-comfort because of shoulder- and waearbelt and carrier handle
    ca. 20 liter capacity
    Bestellen
    10,00 €* excl VAT
    11,90 €* VAT included
    Art.-No.:
    seesack
    delivery: available ex stock


    Sail portfolio for all four sets of 3x1, VOLVO OCEAN 65, V70i
    Rolling your sails instead of folding them is the better way of handling them. However the best way is to have them flat and straight in a bag.

    This new sail portfolio can hold four differently sized sails. The single sleeves are velcro fastened to keep your sails securely in place and make browsing through them a doddle. The different sizes of the individual sleeves make it easy to find the right sails for your needs in an instant.
    Bestellen
    91,60 €* excl VAT
    109,00 €* VAT included
    Art.-No.:
    3x1setasw
    delivery: available ex stock


    Sail portfolio for all four sets of Dragon Force, RG65, R46/TP52 Race
    Rolling your sails instead of folding them is the better way of handling them. However the best way is to have them flat and straight in a bag.

    This new sail portfolio can hold four differently sized sails. The single sleeves are velcro fastened to keep your sails securely in place and make browsing through them a doddle. The different sizes of the individual sleeves make it easy to find the right sails for your needs in an instant.
    Bestellen
    83,19 €* excl VAT
    99,00 €* VAT included
    Art.-No.:
    dfseta
    delivery: available ex stock


    Carrying Bag for R46

    available on request VAT included
    Art.-No.:
    50922
    delivery: 3-7 weekdays, will be produced for you


    Carrying bag for 3 x 1
    With a solid zipper
    Bestellen
    108,40 €* excl VAT
    129,00 €* VAT included
    Art.-No.:
    3x1taei
    delivery: on request


    Transportation box C-Class/J-Class "ALEXSEAL-Edition"
    - 7mm light weight constration comb plastic
    - outer diameter: 130x30x40cm (w/d/h)
    - folding lid
    - 2 butterfly locks
    - 8 bullet edges
    - 8 dwell angle
    - edge protection 30mm aluminium
    - fitted carrier for boat and rigging
    Bestellen
    579,83 €* excl VAT
    690,00 €* VAT included
    Art.-No.:
    3x1case
    delivery: on request


    Transport box J-Class
    - 7 mm Leichtbauwabenkunststoff
    - Außenmaße: 138x30x40cm (B/T/H)
    - Deckel oben klappbar
    - 2 Butterflyverschlu?sse in Einbauschale
    - Aufstellscharniere, 2 Federklappgriffe in Einbauschale
    - 8 Kugelecken
    - 8 Schließwinkel
    - Kantenschutz Aluminium 30 mm umlaufend
    - passende Halterungen für Boot und Rigg
    Bestellen
    621,85 €* excl VAT
    740,00 €* VAT included
    Art.-No.:
    jclasscase
    delivery: 3 - 4 weeks


    Windex - Wind direction/ weather vane for large model yachts, neon-yellow
    Easy to see and smooth running Windex for model boats such as the AC60, 3x1, VO60, Seawind, C-Class or Focus 99.

    Simply attached to the boat's mast by a couple of wire straps. It's neon colour makes it well visible.

    Total length: 225mm
    Lenght of weather vane: 150-170mm
    colour: neon yellow
    Bestellen
    21,68 €* excl VAT
    25,80 €* VAT included
    Art.-No.:
    ver2g
    delivery: available ex stock


    Windex - Wind direction/ weather vane for model yachts, neonyellow
    Easy to see and smooth running Windex for model boats such as the AC60, 3x1, VO60, Seawind, C-Class or Focus 99.

    Simply attached to the boat's mast by a couple of wire straps. It's neon colour makes it well visible.

    Total length: 165mm
    Lenght of weather vane: 100mm
    colour: neon yellow
    includes mount
    Bestellen
    12,52 €* excl VAT
    14,90 €* VAT included
    Art.-No.:
    ver1g
    delivery: on request


    Windex - Wind direction/ weather vane for model yachts, neonpink
    Easy to see and smooth running Windex for model boats such as the AC60, 3x1, VO60, Seawind, C-Class or Focus 99.

    Simply attached to the boat's mast by a couple of wire straps. It's neon colour makes it well visible.

    Total length: 165mm
    Lenght of weather vane: 100mm
    colour: neon pink
    includes mount
    Bestellen
    12,52 €* excl VAT
    14,90 €* VAT included
    Art.-No.:
    ver1p
    delivery: available ex stock


    VO 60 Rack folding with belds
    Rack off wood with binconverse belds
  • high quality screws
  • its perfect for the VO60
  • perfectly folding through the belds
  • Bestellen
    38,66 €* excl VAT
    46,00 €* VAT included
    Art.-No.:
    vo60rack
    delivery: available ex stock



    Rack off wood with binconverse belds
  • high quality screws
  • its perfect for the VO70
  • perfectly folding through the belds
  • Bestellen
    41,18 €* excl VAT
    49,00 €* VAT included
    Art.-No.:
    vo70rack
    delivery: available ex stock


    VO 70 carbon rack
    Extreme light and very simple to transport. This rach is very practicable and looks very nice. Made of carbon sandwich. 3 parts, wich can easily sticked together. The support plates are made of cellular rubber.
    Bestellen
    250,42 €* excl VAT
    298,00 €* VAT included
    Art.-No.:
    vo70rackc
    delivery: available ex stock


    VO70 Event-Transportbox "Matchrace", air-freight optimized
    Care for your precious modelboat, and order our flightcase together with your boat. The size and the materials are optimised for air-freight: Polypropylen lightweight comb-structure plastic, all borders are protected with alloy profiles. The boxes are fitted with convertible top and two handle bars. The foam inlets fits the boat perfectly. Transmitter, chargers, mast, rack - all parts have specialised attachments or boxes. The mast has to be spltted in to parts and can be fixed on an adequate board. We offer two box types: "Fleetrace-Box" and "Matchrace-Box"

    Weight: ca. 13,5Kg
    Outside dimensions approx. 116x53x53cm
    Bestellen
    705,88 €* excl VAT
    840,00 €* VAT included
    Art.-No.:
    vo70case2
    delivery: on request


    V70 stand made from Perspex, 8mm strong with oval base
    High quality and very decorative stand for your model made from 8mm strong polished Perspex. The stand's oval base harmonises with the shape of the vessel's hull. It was designed with a stand model in mind.

    Easily dismantled due to being held together by four screws only. Delivery including screws; needs to be assembled by yourself.
    Bestellen
    125,21 €* excl VAT
    149,00 €* VAT included
    Art.-No.:
    vo70racko


    VO70 Event-Transportbox, air-freight optimized
    Care for your precious modelboat, and order our flightcase together with your boat. The size and the materials are optimised for air-freight: Polypropylen lightweight comb-structure plastic, all borders are protected with alloy profiles. The boxes are fitted with convertible top and two handle bars. The foam inlets fits the boat perfectly. Transmitter, chargers, mast, rack - all parts have specialised attachments or boxes. The mast has to be spltted in to parts and can be fixed on an adequate board. We offer two box types: "Fleetrace-Box" and "Matchrace-Box"

    Weight: ca. 11Kg
    Outside dimensions approx. 116x53x35cm
    Bestellen
    621,85 €* excl VAT
    740,00 €* VAT included
    Art.-No.:
    vo70case
    delivery: on request


    Wettfahrtregel - Regeln & Taktik
    Regelkonformes Segeln mit Hilfe von Illustrationen sehr verständlich erklärt! Einmalig und besonders wertvoll sind die Anmerkungen von Roman Koch (mehrfacher Soling-Weltmeister).
    Das Nachschlagewerk für Regattasegler, ist ein MUSS für die Ausrüstung.

    Broschierte Ausgabe
    Bestellen
    12,52 €* excl VAT
    14,90 €* VAT included
    Art.-No.:
    131193
    delivery: available ex stock


    Overload Protection for sailwinches and servos
    Electronic overload protection including integrated protection against over voltage peaks. JR version (simply put in between battery switch and servo just like an extension cord).

    - A connected consumer (servo, pump, ignition system or similar) is turned off when exceeding current flows or a short is encountered
    - Protects LiPo voltage regulators or battery switches by reducing the heat dissipation when shorts or exceeding currents are encountered
    - Simple programming including automatically learning of the maximum current
    - Displays maximum current using LED blink codes
    - Automatically turns on again after 5 seconds of wait time if so programmed
    - Protection against voltage peaks caused by the dynamo effect of powerful digital servos (starting from approx. 7.5 volts)
    - Continuous current 8A

    Bestellen
    30,17 €* excl VAT
    35,90 €* VAT included
    Art.-No.:
    rcueberlast
    delivery: available ex stock

    * But are exclusive of shipping and handling cost and C.O.D charge (where required). We ship worldwide at competitive rates. Additional duty or import charges may apply depending on the delivery destination. Terms and conditions may be subject to change. All rights reserved.


    racks for model boats: useful or simply beautiful

     


    3x1 stick for rack
    Mit diesen Aufkleber können Sie Ihren Bootsnamen und Segelnummer auf den Kunststoffständer anbringen.
    Bestellen
    15,97 €* excl VAT
    19,00 €* VAT included
    Art.-No.:
    130281
    delivery: 1-3 weekdays, will be produced for you


    3x1 rack easy plug - suits the transport bag
    The ultra-transportable 3x1 rack. This rack can be mounted in 3 seconds. The elastic cords prevents falling in pieces. Made of light but nearly unbreakable plastics.

    The rack is suitable for the boat bag/transport bag!
    Bestellen
    40,34 €* excl VAT
    48,00 €* VAT included
    Art.-No.:
    3x1rack
    delivery: available ex stock


    Original kyosho stand for AC Modell
    Alloy / plastic
    Bestellen
    26,81 €* excl VAT
    31,90 €* VAT included
    Art.-No.:
    acRackAlu
    delivery: no longer available


    AC60 Ständer
    AC60 Ständer, leichte Kratzer, sieht aber immer noch toll aus. EUR 100,- statt 270,-.
    Bestellen
    84,03 €* excl VAT
    100,00 €* VAT included
    Art.-No.:
    130643
    delivery: available ex stock


    ACC 110 / VO 60 Tuningkeel Rack folding with belds
    Rack off wood wit binconverse belds

  • high quality screws
  • its perfect for the VO60 with Tuningkeel or for the AC 1100
  • perfectly folding through the belds
  • Bestellen
    38,66 €* excl VAT
    46,00 €* VAT included
    Art.-No.:
    accrack
    delivery: available ex stock


    Dragon Force Bootsständer
    Kunststoff
    Bestellen
    15,13 €* excl VAT
    18,00 €* VAT included
    Art.-No.:
    dfstand
    delivery: available ex stock


    Precious AC wall holder, perspex
    Precious AC wall holder, perspex.
    The ideal wall holder for a decoratively presentation of your AC60 model yacht.
    Bestellen
    49,58 €* excl VAT
    59,00 €* VAT included
    Art.-No.:
    AcRackWr
    delivery: available ex stock


    Precious boat rack made of perspex, H-form
    The ideal rack for regatta boats with special painting. Made of perspex polished to a high finish. The hull does not bear upon the perspex-ground, but is held in place by thin chords.
    Easily removable through 4 screws. Ships disassembled.

    Bestellen
    74,79 €* excl VAT
    89,00 €* VAT included
    Art.-No.:
    ?AcRackH
    delivery: available ex stock


    precious oval perspex stand for AC model
    High-class, decorative perspex stand for AC models. It gives an harminic look in combination with your AC model.
    Form: oval.
    Bestellen
    54,62 €* excl VAT
    65,00 €* VAT included
    Art.-No.:
    ?AcRackO
    delivery: available ex stock


    Precious rack (perspex), for VO-racers
    Premium and decorative rack made of perspex, polished to a high finish. The ideal rack for your table. Distance from the floor to the edge of the deck: ca. 60cm. The boat takes up a slightly inclined position allowing for the sails to show up extraordinarily well.
    Bestellen
    257,14 €* excl VAT
    306,00 €* VAT included
    Art.-No.:
    ?VoRackB
    delivery: 14-21 weekdays, will be produced for you


    Precious rack (perspex), for VO-racers
    Premium and decorative rack made of perspex, polished to a high finish. The ideal rack for your table. Distance from the floor to the edge of the deck: ca. 40cm. The boat takes up a slightly inclined position allowing for the sails to show up extraordinarily well.
    Bestellen
    228,57 €* excl VAT
    272,00 €* VAT included
    Art.-No.:
    VoRackT
    delivery: 3-7 weekdays, will be produced for you


    Premium acrylic glass stand for the BV110
    - 600x250x10mm
    - Baseplate with facet-sanding
    - Boatstand laser-welded, incl. drilled hole, thread and VA screws
    Bestellen
    189,08 €* excl VAT
    225,00 €* VAT included
    Art.-No.:
    bvacrylsta
    delivery: 14-21 weekdays, will be produced for you


    High quality boat rack made of acrylic glass for 3x1
    Very high quality and decorative rack made out of acrylic glass.
    Between the rack and the hull is foam rubber.
    It's very easy to slot the part into each other. The rack fits into the hold-all bag.
    Bestellen
    108,40 €* excl VAT
    129,00 €* VAT included
    Art.-No.:
    3x1rack1
    delivery: 5-10 weekdays, will be produced for you


    High quality boat rack made of acrylic glass for 3x1
    Very high quality and decorative rack made out of acrylic glass.
    Between the rack and the hull is foam rubber.
    It's very easy to slot the part into each other. The rack fits into the hold-all bag.
    Bestellen
    125,21 €* excl VAT
    149,00 €* VAT included
    Art.-No.:
    VO65rack
    delivery: 3-7 weekdays, will be produced for you


    High quality presentation rack for your Open60
    Sturdy presentation cradle made from acrylic glass of 6mm in strength

    Self assembly. Phillips screwdriver required.
    Bestellen
    82,35 €* excl VAT
    98,00 €* VAT included
    Art.-No.:
    o60rack
    delivery: 3-7 weekdays, will be produced for you


    luxury boat rack with 3x1-logo
    Very high quality and decorative rack made out of acrylic glass. The 3x1 Logo is engraved into the rack
    Between the rack and the hull is foam rubber.
    It's very easy to slot the part into each other. The rack fits into the hold-all bag.
    Bestellen
    167,23 €* excl VAT
    199,00 €* VAT included
    Art.-No.:
    3x1rack2
    delivery: 5-10 weekdays, will be produced for you


    Open 60 Rack folding with belds
    Rack off wood with binconverse belds
    - high quality steel
    - its perfect for the Open 60
    - perfectly folding through the belds
    Bestellen
    38,66 €* excl VAT
    46,00 €* VAT included
    Art.-No.:
    op60rack
    delivery: available ex stock


    R46/AC60 Stand
    Stand from wood. The straps are preserving the hull from damage.
    - Stainless Steel Screws
    - perfect for R46 and AC60
    - easy to furl
    - small pack size (only 2cm flat)
    Bestellen
    32,77 €* excl VAT
    39,00 €* VAT included
    Art.-No.:
    r46rack
    delivery: available ex stock


    VO 60 Rack folding with belds
    Rack off wood with binconverse belds
  • high quality screws
  • its perfect for the VO60
  • perfectly folding through the belds
  • Bestellen
    38,66 €* excl VAT
    46,00 €* VAT included
    Art.-No.:
    vo60rack
    delivery: available ex stock



    Rack off wood with binconverse belds
  • high quality screws
  • its perfect for the VO70
  • perfectly folding through the belds
  • Bestellen
    41,18 €* excl VAT
    49,00 €* VAT included
    Art.-No.:
    vo70rack
    delivery: available ex stock


    VO 70 carbon rack
    Extreme light and very simple to transport. This rach is very practicable and looks very nice. Made of carbon sandwich. 3 parts, wich can easily sticked together. The support plates are made of cellular rubber.
    Bestellen
    250,42 €* excl VAT
    298,00 €* VAT included
    Art.-No.:
    vo70rackc
    delivery: available ex stock


    V70 stand made from Perspex, 8mm strong with oval base
    High quality and very decorative stand for your model made from 8mm strong polished Perspex. The stand's oval base harmonises with the shape of the vessel's hull. It was designed with a stand model in mind.

    Easily dismantled due to being held together by four screws only. Delivery including screws; needs to be assembled by yourself.
    Bestellen
    125,21 €* excl VAT
    149,00 €* VAT included
    Art.-No.:
    vo70racko

    * But are exclusive of shipping and handling cost and C.O.D charge (where required). We ship worldwide at competitive rates. Additional duty or import charges may apply depending on the delivery destination. Terms and conditions may be subject to change. All rights reserved.