Fast accessories for your VO-racer:

There is always room for improvement, no matter how good a product is: With our Tuning Boom Vang you can easily and precisely adjust the boats luff fully closed with slight wind, increasingly opened up as the wind intensifies. The rest can be done via the backstay adjustment while sailing across the water. And the boom vang also provides for an easy and comfortable changeover to lug sails.

The tuning keel made of carbon and lead weighs just a tiny 150g more than the standard keel (dyed red on the picture to the left) and, what is more, goes a significant 45mm deeper, thus allowing for even greater beating qualities. Moreover, we moved the centre of gravity back and optimised the hydrodynamics of both fin and keel bomb ? for significantly higher reaching velocities, especially at strong wind.

 


2 tell tales/wind indicators
The tell tales are telling the air flow in the sails.
Bestellen
2,35 €* excl VAT
2,80 €* VAT included
Art.-No.:
wiba
delivery: available ex stock


Tuning rudder for 3x1, ACC110 or VO60 - made from carbon reinforced epoxy
CNC milled rudder shape. Standard carbon rudder for either 3x1 or ACC110. Can also be used as tuning rudder for Phoenix, Focus, VO60 and Seawind. If attached to VO60, the upper edge needs to be trimmed.
Bestellen
57,14 €* excl VAT
68,00 €* VAT included
Art.-No.:
acc110rud2
delivery: available ex stock


VO-Racer/ACC 110 backstay spreader
  • length: 156mm
  • 2mm aluminium from aircraft construction
  • ground
  • anodised (silver)
  • Bestellen
    15,97 €* excl VAT
    19,00 €* VAT included
    Art.-No.:
    voach
    delivery: available ex stock


    Boom vang VO-Racer/ACC 110
    Our premium boom vang, specifically modified for our VO-racer:
  • old suspension has been sawn off
  • pre-drilled at the bottom
  • glued-in suspension by Kyosho
  • 4mm thread
  • Bestellen
    62,18 €* excl VAT
    74,00 €* VAT included
    Art.-No.:
    VoBa
    delivery: no longer available


    Boom vang, aluminium
    Use this to virtually perfect your VO-racer or ACC 110!
    Anodised aluminium, with right-hand and left-hand thread. A dream to adjust thanks to the lovely and filigree adjustment knurl.
    - 4mm threat (M4)
    - Lenght over all: 134mm to 156mm
    Bestellen
    38,66 €* excl VAT
    46,00 €* VAT included
    Art.-No.:
    zuba
    delivery: no longer available


    Very fast digital standard size sail servo with titanium gears and alloy case
    Full CNC aluminium hulls and structure, digital, Titanium gears standard servo.
    This servo can be used in the 3x1, but we it need special plates for mounting, because this servo is much smaller than the base version. If you use this servo during 3x1 races, you have to add lead in your boat.
    Bestellen
    58,66 €* excl VAT
    69,80 €* VAT included
    Art.-No.:
    serlow1
    delivery: available ex stock


    block, small ø 5mm stainless steel
    overall lenght: 10mm
    grommet diameter
    material: stainless steel
    up to 1mm hemp rope/leash
    Bestellen
    3,28 €* excl VAT
    3,90 €* VAT included
    Art.-No.:
    blo5m
    delivery: available ex stock


    low profile digital sailservo with 9kg stall torque, metal gears
    Dead band: 2?s
    Working frequence: 1520?s / 330hz
    Operating Voltage: DC4.8~6.0 V
    Operating Speed (4.8V): 0.13sec/60 degrees
    Operating Speed (6V): 0.11 sec/60 degrees
    Stall Torque (4.8V): 8.65kg.cm(120.15oz/in)
    Stall Torque (6.0V): 9.45 kg.cm(130.88 z/in)
    Dimensions: 41x20.3x29.5mm/1.61X0.80X1.16in
    Weight:42.65g(1.5oz)
    Connector Wire Length: JR265mm(10.43in)
    Bestellen
    22,61 €* excl VAT
    26,90 €* VAT included
    Art.-No.:
    serfla
    delivery: appr. 2 months


    Extremely light weight rechargeable batteries - 5 x SANYO Eneloop 6V/ 800mAh
    Set of 4 AAA-type rechargeable batteries with 6V and 800mAh. THE light weight power set for the ambitious race skipper!
    Bestellen
    18,49 €* excl VAT
    22,00 €* VAT included
    Art.-No.:
    AAA6
    delivery: available ex stock


    Windex - Wind direction/ weather vane for large model yachts, neon-yellow
    Easy to see and smooth running Windex for model boats such as the AC60, 3x1, VO60, Seawind, C-Class or Focus 99.

    Simply attached to the boat's mast by a couple of wire straps. It's neon colour makes it well visible.

    Total length: 225mm
    Lenght of weather vane: 150-170mm
    colour: neon yellow
    Bestellen
    21,68 €* excl VAT
    25,80 €* VAT included
    Art.-No.:
    ver2g
    delivery: available ex stock


    Windex - Wind direction/ weather vane for model yachts, neonpink
    Easy to see and smooth running Windex for model boats such as the AC60, 3x1, VO60, Seawind, C-Class or Focus 99.

    Simply attached to the boat's mast by a couple of wire straps. It's neon colour makes it well visible.

    Total length: 165mm
    Lenght of weather vane: 100mm
    colour: neon pink
    includes mount
    Bestellen
    12,52 €* excl VAT
    14,90 €* VAT included
    Art.-No.:
    ver1p
    delivery: available ex stock


    VO-Racer/ACC 110 Set/Kit for backstay adjustment
    All you will ever need to equip your VO-racer with a backstay adjustment!

    - Winch
    - Mount material
    - Spectra-line
    - block
    Bestellen
    49,58 €* excl VAT
    59,00 €* VAT included
    Art.-No.:
    voaset
    delivery: available ex stock


    VO-Racer tuningkit including individaually designed sails
    This tuning set turns a a standard "Seawind" into a hot Vo60-racer!
    (Picture without sails, jib boom and manual)

    Bestellen
    309,24 €* excl VAT
    368,00 €* VAT included
    Art.-No.:
    votunind
    delivery: 3-7 weekdays, will be produced for you


    VO-Racer Tuningkit including sails in stockmaritime Design
    This tuning set turns a a standard "Seawind"into a hot Vo60-racer!
    (Picture without sails and genua boom)

    Bestellen
    208,40 €* excl VAT
    248,00 €* VAT included
    Art.-No.:
    votun
    delivery: 3-7 weekdays, will be produced for you


    VO-Racer Tuningkit including sails in a neutral design
    This tuning set turns a a standard "Seawind" into a hot Vo60-racer!
    (Picture without sails and genua boom)

    Bestellen
    250,42 €* excl VAT
    298,00 €* VAT included
    Art.-No.:
    votunneu
    delivery: 3-7 weekdays, will be produced for you


    New: VO60 tuning-keel sanded, not painted
    The VO-racer?s centre of gravity is moved to the back of the model allowing for great sailing characteristics, especially in very windy conditions. The enhanced fin also improves the sailing qualities. The fin is carbon fiber reinforced, the fibers leads into the bomb.
    The threaded rod is longer than neccessary and has to be shortened.
    Bestellen
    82,35 €* excl VAT
    98,00 €* VAT included
    Art.-No.:
    vo60tunkielge
    delivery: available ex stock


    VO60/ACC110 tuning keel 1,6 kg coated orange
    The VO-racer?s centre of gravity is moved to the back of the model allowing for great sailing characteristics, especially in very windy conditions. The enhanced fin also improves the sailing qualities. The fin is carbon fiber reinforced, the fibers leads into the bomb.
    The threaded rod is longer than neccessary and has to be shortened.
    Bestellen
    116,81 €* excl VAT
    139,00 €* VAT included
    Art.-No.:
    vo60tunkielora
    delivery: 14-21 weekdays, will be produced for you


    VO60/ACC110 tuning keel 1,6 kg coated black
    The VO-racer?s centre of gravity is moved to the back of the model allowing for great sailing characteristics, especially in very windy conditions. The enhanced fin also improves the sailing qualities. The fin is carbon fiber reinforced, the fibers leads into the bomb.
    The threaded rod is longer than neccessary and has to be shortened.
    Bestellen
    142,02 €* excl VAT
    169,00 €* VAT included
    Art.-No.:
    vo60tunkiellack
    delivery: on request


    Cap Maquettes turnbuckle with 20mm instep way
    43mm, maximum Lenght is 63mm
    Bestellen
    16,64 €* excl VAT
    19,80 €* VAT included
    Art.-No.:
    wantspa2
    delivery: available ex stock


    Cap Maquettes pair turnbuckle with hook
    turnbuckle wit hook. incl. hook 47mm,
    maximum Lenght is 59mm.
    Bestellen
    10,76 €* excl VAT
    12,80 €* VAT included
    Art.-No.:
    wantspaha
    delivery: available ex stock

    * But are exclusive of shipping and handling cost and C.O.D charge (where required). We ship worldwide at competitive rates. Additional duty or import charges may apply depending on the delivery destination. Terms and conditions may be subject to change. All rights reserved.

    thousands of cool parts
    We have nearly all original Kyosho sailing parts and our stockmaritime spareparts on stock. You will find our complete assortment with the navigation on the right side (modelboat shop/accessory) oder here >>.