Spare parts

Our vast accessory programme lets you repair and tune your model boat to your liking.
Parts that have been especially devised for your SeaCret can be found at our tuning pages.

We're always happy get feedback. If you'd like to speak your mind, then please
feel free to either drop us a line or give us a ring on +49.40.86662714.


SeaCret add-ons and spare parts


 


Tuning rudder for 3x1, ACC110 or VO60 - made from carbon reinforced epoxy
CNC milled rudder shape. Standard carbon rudder for either 3x1 or ACC110. Can also be used as tuning rudder for Phoenix, Focus, VO60 and Seawind. If attached to VO60, the upper edge needs to be trimmed.
Bestellen
49,58 €* excl VAT
59,00 €* VAT included
Art.-No.:
acc110rud2
delivery: on request


VO-Racer/ACC 110 backstay spreader
  • length: 156mm
  • 2mm aluminium from aircraft construction
  • ground
  • anodised (silver)
  • Bestellen
    15,97 €* excl VAT
    19,00 €* VAT included
    Art.-No.:
    voach
    delivery: 10 weekdays


    Battery box for 4AA-cells, JR-plug
    Standard battery box for Micro Magic, Open 60, Seawind etc.
    With 4 AA 900mAh-cells and our Regatta-Tuning-Kit you get up to 8 hours of sailing
    plug: Graupner/JR

    (Picture similar)
    Bestellen
    3,28 €* excl VAT
    3,90 €* VAT included
    Art.-No.:
    raba1
    delivery: no longer available


    Bevelled stay fastener with 2 holes - laser cut from V4A stainless steel
    Stay fastener made from 0.8mm strong laser cut V4A stainless steel panels. These fittings. These fittings are suitable for the following models: 3x1, ACC110, VO70, VO60 and others. Made in Germany.
    Bestellen
    2,35 €* excl VAT
    2,80 €* VAT included
    Art.-No.:
    stmbes2
    delivery: available ex stock


    3-hole fitting for shroud and stay - laser cut from V4A stainless steel
    Shroud fastener made from 0.8mm strong laser cut V4A stainless steel panels. These fittings are suitable for the following models: 3x1, ACC110, VO70, VO60 and others. Made in Germany.
    Bestellen
    2,44 €* excl VAT
    2,90 €* VAT included
    Art.-No.:
    stmbes3
    delivery: available ex stock


    Set of fittings for shroud fore- and backstay, made of V4A stainless steel - laser cut Made in Germany (fits seawind also)
    Laser cut set of fasteners for shroud, fore- and backstay - made in Germany of stainless V4A steel in 0.8mm strength. Suitable for models 3x1, ACC110, V70, V60 and others.
    Bestellen
    8,07 €* excl VAT
    9,60 €* VAT included
    Art.-No.:
    stmbesset
    delivery: available ex stock


    Small Block, ball bearing stainless steel, diameter 10mm
    This block is amazing. Small but withstands a load of 80kg!
    Beautiful stainless steel, perfectly manufactured.
    We use this block in the canting keel mechanism on our Volvo Ocean Race models.

    For max 2mm sheets
    Diameter plate: 10mm
    Length: 15mm, 20mm with shackle
    Tested up to a load of 80 kg

    Used in our Volvo 65 and VO70
    Bestellen
    7,98 €* excl VAT
    9,50 €* VAT included
    Art.-No.:
    bloedku
    delivery: available ex stock


    Steering arm / rudder horn 48mm
    - brass/plastic
    - 4mm bore hole
    - 50mm wide
    - 21mm from axis to the outer hole
    - PLEASE REGARD: the screw is not saltwater resistant
    - fits our 3mm knurled screw stainless steel
    Bestellen
    5,71 €* excl VAT
    6,80 €* VAT included
    Art.-No.:
    Rudhorc
    delivery: available ex stock


    hooks, rust-free
    High quality hook for hooing the batten in, e.g. at the 3x1
    Bestellen
    1,09 €* excl VAT
    1,30 €* VAT included
    Art.-No.:
    haka
    delivery: available ex stock


    Industrie-Sekundenkleber 20g Flasche, dickflüssig, sehr langsam
    Dickflüssiger Cyanacrylat-Sekundenkleber mit langsamer Härtung. Klebt Metall, Gummi, Kunststoff, Keramik und Holz. Ist bei Lagerung in der Tiefkühltruhe nahezu unbegrenzt haltbar. Die Flasche enthält 20g.

    Unser meistbenutzter Kleber. Gehört in jede Werkzeugkiste.
    Bestellen
    5,80 €* excl VAT
    6,90 €* VAT included
    Art.-No.:
    sekl20
    delivery: available ex stock


    5 slider, 15mm, white
    White, with 1 mm Ø holes. Dimensions 15 x 3 x 2 mm. Contains 5 pieces
    Bestellen
    3,28 €* excl VAT
    3,90 €* VAT included
    Art.-No.:
    zuklemw
    delivery: no longer available


    Megapower sailservo with 30kg stall torque, digital, metal gears
    Our power machine for our boats longer than one meter and with mor weight than 3kg. Perfekt for the C-Class.
    Digital, aluminium middle case, metal gears servo.
    Bestellen
    50,00 €* excl VAT
    59,50 €* VAT included
    Art.-No.:
    serpomax
    delivery: available ex stock


    Stainless steel knurled screw with M3 thread
    This knurled screw replaces the coventional Allan screws used on the tiller.
    Made of A2 stainless steel.

    Size:
    Outer wheel: 12mm
    Screw body diameter: 8mm
    Thread: M3
    Bestellen
    4,96 €* excl VAT
    5,90 €* VAT included
    Art.-No.:
    raends3
    delivery: available ex stock


    stockmaritime Powercord Plus - 10m Dyneema black 0,58mm, 82 kg breaking limit
    The new Powercord Plus is a advancement of the modern Dynemacord. She is produced for the needs of a model sailer. This cord is braided even tighter then other braided cord. Thereby the expansion, galling and drill quality got better.
    - braided really tight
    - super soft with minimal expansion
    - extrem high galling and knots stability
    - drill characteristic
    - no memory effect
    - 100% dyneema
    - colour: anthracite
    - thickness: approx. 0,58mm
    - breaking load: approx. 82,0kg
    Bestellen
    7,48 €* excl VAT
    8,90 €* VAT included
    Art.-No.:
    poco10
    delivery: available ex stock


    stockmaritime Powercord Plus - 1m Dyneema black 0,58mm, 82 kg breaking limit
    The new Powercord Plus is a advancement of the modern Dynemacord. She is produced for the needs of a model sailer. This cord is braided even tighter then other braided cord. Thereby the expansion, galling and drill quality got better.
    - braided really tight
    - super soft with minimal expansion
    - extrem high galling and knots stability
    - drill characteristic
    - no memory effect
    - 100% dyneema
    - colour: anthracite
    - thickness: approx. 0,58mm
    - breaking load: approx. 82,0kg
    Bestellen
    1,01 €* excl VAT
    1,20 €* VAT included
    Art.-No.:
    poco
    delivery: available ex stock


    0.5mm Spectra line, 100m spool
    The perfect companion for you model boat, no matter whether sheet, backstay or forestay shroud or rudder steering, this line will cope with a lot and withstand most loads. White,weldable and very smooth line with an ultimate load of 30kg. 100m spool.
    Bestellen
    20,08 €* excl VAT
    23,90 €* VAT included
    Art.-No.:
    DynaMi06
    delivery: in stock


    Grommets for quick swapping of sails - Set of 10
    Easy to handle grommets for a fast change of sails. Simply push and click. You'll need a minimum of 9 for main and foresails. This set contains one spare.
    Bestellen
    4,20 €* excl VAT
    5,00 €* VAT included
    Art.-No.:
    10ScRi
    delivery: in stock

    * But are exclusive of shipping and handling cost and C.O.D charge (where required). We ship worldwide at competitive rates. Additional duty or import charges may apply depending on the delivery destination. Terms and conditions may be subject to change. All rights reserved.
     

    SeaCret battery sets and chargers

     


    Duo-Charger: Charging your boat and transmitter batteries at the same time
    With this charger you can charge your transmitter battery and your boat battery at the same time. If you use the connectors shown in our picture, the first (boat) battery will become charged with 1000 mAh, and the second (transmitter) battery wil become charged with 500 mHh. If the battery is full, the charger stops and the indicator LED will change to green. Simple.
    Bestellen
    58,74 €* excl VAT
    69,90 €* VAT included
    Art.-No.:
    multi9
    delivery: available ex stock


    very useful charger for transmitter and boat battery, up to three batteries charging at the same time
    Plug-in multi-charger for a variety of applications. Builders of model aircraft and boats can use the multi-charger 3 for simultaneous high-speed charging of drive batteries as well as transmitter and receiver NiMH or NiCd batteries

    - All 3 sections can be used at the same time and with delta peak cut-off
    - All 3 charger cables are ready assembled on the device
    - LED for each charger output
    - Increased output power
    - Lightweight switched-mode power supply
    - Pulsed output current for improved battery power and capacity
    - When only one or two of the outputs are used, charging times decrease and charge pulses are longer.
    - Age recommended by manufacturer: 14 years and up
    - perfect for 4,8V/ 6V AAA and AA battery packs



    Specification
    Voltage: 230 V AC V
    All-up weight, approx.: 340 g
    Transmitter battery: 8 NiCd/NiMH (9,6 V) 1 - 1,5 A gepulst für Graupner/JR-Sender V; Ah
    Drive battery: 6 - 8 NiCd/NiMH /7,2 - 9,6 V) 1 - 2 A gepulst mit JST-Stecker V; Ah
    Mains input: 110 - 240 V AC/50 - 60 Hz/MAX. 30 W V/Hz/W
    Charge output: 3 mit Delta Peak Abschaltung
    Dimensions (LxWxH): 136 x 72 x 39 mm
    Receiver battery: 4 - 5 NiCd/NiMH (4,8 - 6 V) 1 - 1,5 A gepulst BEC-Anschluss V; A
    Disconnection NiMH/NiCd: Delta peak
    Charge current: 1 - 2 A pulsed A
    Bestellen
    24,79 €* excl VAT
    29,50 €* VAT included
    Art.-No.:
    multi3
    delivery: available ex stock

    * But are exclusive of shipping and handling cost and C.O.D charge (where required). We ship worldwide at competitive rates. Additional duty or import charges may apply depending on the delivery destination. Terms and conditions may be subject to change. All rights reserved.
     

     


    SANYO Eneloop AA NiMH 1.2/2000 mAh rechargable battery
    Eneloop cells are a brandnew generation of rechargable batteries. An initial charge is unnecessary and the batteries are ready to use right after purchase.

    Their power storing capability is unsurpassed. These batteries are reliable and if you don't want to use them right away, they will only lose a tiny fraction of the charge they're holding. Even if you put them away for ten weeks, tests have shown the Eneloop to still hold up 85% of its charge. They will last for about 1500 cycles.

    Specifications:
    Type: AA/R6 Ni-MH
    Voltage: 1.2
    Electric charge: 2000mAh
    Size: 14.5mm at 5.5mm diameter
    Weight: 26g

    Price is for single battery only!
    Bestellen
    2,94 €* excl VAT
    3,50 €* VAT included
    Art.-No.:
    eneloop2000
    delivery: available ex stock


    4x SANYO Eneloop AA NiMH 1.2/2000 mAh rechargable battery
    Eneloop cells are a brandnew generation of rechargable batteries. An initial charge is unnecessary and the batteries are ready to use right after purchase.

    Their power storing capability is unsurpassed. These batteries are reliable and if you don't want to use them right away, they will only lose a tiny fraction of the charge they're holding. Even if you put them away for ten weeks, tests have shown the Eneloop to still hold up 85% of its charge. They will last for about 1500 cycles.

    Specifications:
    Type: AA/R6 Ni-MH
    Voltage: 1.2
    Electric charge: 2000mAh
    Size: 14.5mm at 5.5mm diameter
    Weight: 26g

    Set of four batteries.
    Bestellen
    10,00 €* excl VAT
    11,90 €* VAT included
    Art.-No.:
    eneloop20004
    delivery: in stock


    Sanyo Eneloop batterypack with 5x NiMH 2000 mAh AA-cells 6V
    The perfect battery for the RG46, TP52 and the Open 60. A light and reliable solution for the BT1 Trimaran and the Volans.

    - Sanyo Eneloop AA-Cells
    - 6 Volt
    - 2000 mAh
    - Weight: 146 gr.
    - Plugs: Graupner/JR
    - L/W/H: 72,00 / 14,50 / 50,00 mm
    Bestellen
    20,17 €* excl VAT
    24,00 €* VAT included
    Art.-No.:
    Akku6v
    delivery: available ex stock


    Extremely light weight rechargeable battery set - 4 x SANYO Eneloop NiMH 800mAh
    Set of 4 AAA-type rechargeable batteries with 4.8V and 800mAh. THE light weight power set for the ambitious race skipper!
    Bestellen
    15,13 €* excl VAT
    18,00 €* VAT included
    Art.-No.:
    AAA48
    delivery: available ex stock

    * But are exclusive of shipping and handling cost and C.O.D charge (where required). We ship worldwide at competitive rates. Additional duty or import charges may apply depending on the delivery destination. Terms and conditions may be subject to change. All rights reserved.